Taipei, Taiwan → Paris, France RTT
ICMP RTT measurement from Taipei, Taiwan to Paris, France: average latency, packet loss, jitter and route efficiency for this Asia–Europe path.
🇹🇼 Taipei, Taiwan (TPE) → 🇫🇷 Paris, France (PAR)
Measurement round: 2026-08-16T04:07:28Z.
In the 2026-08-16T04:07:28Z test round, ICMP echo requests from Taipei, Taiwan to Paris, France averaged 173.8 ms over 50 samples, with a minimum of 169.08 ms and a maximum of 187.89 ms. Zero packet loss and 3.31 ms jitter accompanied the fair latency tier.
Paris sits on the Northwest European corridor with dense national and pan-European fiber paths. The geodesic distance of about 9,846 km yields a vacuum floor of 65.69 ms and a fiber floor of 96.42 ms; the measured path runs about 1.8 times that fiber floor, or 55.5 percent fiber efficiency.
Against the 19 outbound routes in the same test set, this route ranks 14th, toward the slower side of the round. Its 3.91 ms standard deviation equals a relative spread of about 2.3 percent, below the median variability ratio of 3.28 percent across the same set, meaning the route is predictable even if its average latency is fair.
Latency Summary
| Metric | Value |
|---|---|
| RTT | 173.8 ms |
| Jitter | 3.31 ms |
| Packet Loss | 0% |
| Standard Fiber Floor | 96.42 ms |
| Fiber Efficiency | 55.5% |
| Latency Tier | Fair |
| Source Region | Asia Pacific |
| Destination Region | Europe |
Ping Measurement Series
The chart below renders the 50-sample ICMP echo measurement round for this route; an accessible table of every sample is included with the chart.
Ping series: TPE → PAR
50 ICMP echo samples at 100 ms intervals · round 2026-08-16T04:07:28Z · avg 173.8 ± 0.55 ms (SE)
Sample distribution: box = interquartile range (171.4–175.0 ms), median 172.9 ms · whiskers = min–max · diamond = round average · each dot is one measured sample.
How to read this chart
The shaded band spans the measured minimum to maximum RTT of all samples collected up to that point, and the thin line traces the running average. The final position therefore matches the round statistics exactly — the band only widens when a new extreme sample arrives.
The dashed line is the round average, and the shaded band at the bottom is the theoretical fiber-optic floor (96.4 ms) for this route.
Full 50-sample dataset
| Seq | Offset (ms) | RTT (ms) |
|---|---|---|
| 1 | 0 | 175.27 |
| 2 | 100 | 171.35 |
| 3 | 200 | 172.15 |
| 4 | 300 | 170.13 |
| 5 | 400 | 171.50 |
| 6 | 500 | 175.83 |
| 7 | 600 | 172.66 |
| 8 | 700 | 174.48 |
| 9 | 800 | 170.86 |
| 10 | 900 | 175.97 |
| 11 | 1000 | 172.04 |
| 12 | 1100 | 172.24 |
| 13 | 1200 | 170.24 |
| 14 | 1300 | 169.33 |
| 15 | 1400 | 174.60 |
| 16 | 1500 | 173.64 |
| 17 | 1600 | 179.02 |
| 18 | 1700 | 187.75 |
| 19 | 1800 | 181.79 |
| 20 | 1900 | 173.64 |
| 21 | 2000 | 175.11 |
| 22 | 2100 | 172.49 |
| 23 | 2200 | 171.62 |
| 24 | 2300 | 169.84 |
| 25 | 2400 | 169.23 |
| 26 | 2500 | 169.08 |
| 27 | 2600 | 174.82 |
| 28 | 2700 | 176.04 |
| 29 | 2800 | 173.52 |
| 30 | 2900 | 173.96 |
| 31 | 3000 | 173.94 |
| 32 | 3100 | 175.67 |
| 33 | 3200 | 171.42 |
| 34 | 3300 | 173.29 |
| 35 | 3400 | 170.72 |
| 36 | 3500 | 187.89 |
| 37 | 3600 | 176.08 |
| 38 | 3700 | 173.15 |
| 39 | 3800 | 173.47 |
| 40 | 3900 | 170.91 |
| 41 | 4000 | 172.23 |
| 42 | 4100 | 178.61 |
| 43 | 4200 | 172.41 |
| 44 | 4300 | 179.19 |
| 45 | 4400 | 172.93 |
| 46 | 4500 | 172.85 |
| 47 | 4600 | 171.51 |
| 48 | 4700 | 172.32 |
| 49 | 4800 | 171.43 |
| 50 | 4900 | 169.78 |
Download This Route's Data
This route's measurement round is published as open data (CC BY 4.0) in CSV, JSON, and YAML. See About This Measurement for citation guidance.
Download this dataset
Per-route ICMP ping series, released under CC BY 4.0. Uncompressed plain text — no decompression step needed.
Theoretical Fiber Latency
The public physical reference uses the GeoNames city centres for Taipei (25.05306, 121.52639) and Paris (48.85341, 2.34880). It does not disclose either facility address.
| Physical Reference | Value |
|---|---|
| WGS-84 geodesic distance | 9,846.2 km |
| Vacuum RTT floor | 65.69 ms |
| Standard fiber RTT floor () | 96.42 ms |
| Low-latency fiber material floor | 96.03 ms |
| Engineering floor (5% path allowance) | 101.26 ms |
| Research 1.33× mapped-fiber reference | 128.24 ms |
| Estimated unamplified path loss | 2067.7 dB |
| Transparent optical spans / inline amplifiers | 130 / 129 |
| Published RTT inflation over fiber floor | 1.8× |
Attenuation is used to estimate the number of 80 km optical spans; it does not directly slow light. See the full theoretical fiber latency, GeoNames, attenuation, and amplifier methodology.
Stability & Trend
The current measurement round (2026-08-16T04:07:28Z) collected 50 ICMP echo samples on this route. Distribution statistics from that round:
| Round Statistic | Value |
|---|---|
| Minimum RTT | 169.08 ms |
| Average RTT | 173.8 ms |
| Maximum RTT | 187.89 ms |
| Standard deviation | 3.91 ms |
| Stdev / average | 2.2% |
RTT trend
Estimated route stability across the selected time window.
- Average
- 173.8 ms
- Minimum
- 172.2 ms
- Maximum
- 175.2 ms
- Average loss
- 0.01%
Route Context
- Departure PoP: Taipei (TPE)
- Destination PoP: Paris (PAR)
- Region overview: Asia Pacific → Europe
- Full global matrix: Backbone Latency Matrix
- Physical methodology: Theoretical Fiber Latency
Related City-Pair Routes
Reverse direction
- Paris to Taipei latency and RTT — 171.9 ms
Fastest routes departing Taipei (TPE)
- Taipei to Hong Kong latency and RTT — 15.5 ms
- Taipei to Tokyo latency and RTT — 31.9 ms
- Taipei to Singapore latency and RTT — 44.3 ms
- Taipei to Seattle latency and RTT — 115.8 ms
- Taipei to Los Angeles latency and RTT — 132 ms
Fastest routes arriving at Paris (PAR)
- London to Paris latency and RTT — 6.4 ms
- Amsterdam to Paris latency and RTT — 7 ms
- Frankfurt to Paris latency and RTT — 7.6 ms
- Marseille to Paris latency and RTT — 8.9 ms
- Berlin to Paris latency and RTT — 15.6 ms
Same corridor (Asia Pacific → Europe)
- Hong Kong to Moscow latency and RTT — 118.2 ms
- Taipei to Moscow latency and RTT — 132.7 ms
- Singapore to Marseille latency and RTT — 140.6 ms
About This Measurement
Published RTT reflects best-case backbone path behavior measured with ICMP echo probes between PoPs. End-user latency also depends on local access networks, congestion, routing policy, and traffic engineering. None of these values is an SLA.
The measurement round behind this page is published as open data under CC BY 4.0 in the Hats Network latency dataset. Per-pair files are available at /opendata/latency/latest/pairs/tpe-par.pings.{csv,json,yaml}. When citing, include the route, the measurement round timestamp, and the dataset version — for example: "Hats Network latency dataset, Taipei → Paris round 2026-08-16T04:07:28Z, CC BY 4.0".
Data auto-generated on August 16, 2026. Explore the full interactive latency matrix or browse more city-pair routes.