Taipei, Taiwan → Singapore RTT
ICMP RTT measurement page for Taipei, Taiwan to Singapore, Singapore: 50 samples, average 44.2 ms round-trip, 0% loss, jitter 1.06 ms.
🇹🇼 Taipei, Taiwan (TPE) → 🇸🇬 Singapore (SIN)
Measurement round: 2026-08-15T04:03:13Z.
In measurement round 2026-08-15T04:03:13Z, 50 ICMP echo samples from Taipei, Taiwan to Singapore, Singapore returned an average round-trip time of 44.2 ms, with a minimum of 42.88 ms and a maximum of 46.44 ms. The standard deviation of 0.96 ms and jitter of 1.06 ms describe a tightly grouped sample, and packet loss was 0%.
The route ranks third among the 19 outbound routes in this measurement set. Its standard-deviation-to-average ratio is about 2.17%, below the 3.08% median for that outbound set, so the stability seen here is better than the midpoint of the measured routes.
For the 3,243.9 km direct-line distance, the fiber-floor estimate is 31.77 ms; the 44.2 ms average is 1.39 times that floor, or about 71.9% fiber-path efficiency. With the 'Excellent' latency tier and no packet loss, most of the measured RTT is explained by physical distance, leaving only a modest overhead component in this sample.
Latency Summary
| Metric | Value |
|---|---|
| RTT | 44.2 ms |
| Jitter | 1.06 ms |
| Packet Loss | 0% |
| Standard Fiber Floor | 31.77 ms |
| Fiber Efficiency | 71.9% |
| Latency Tier | Excellent |
| Source Region | Asia Pacific |
| Destination Region | Asia Pacific |
Ping Measurement Series
The chart below renders the 50-sample ICMP echo measurement round for this route; an accessible table of every sample is included with the chart.
Ping series: TPE → SIN
50 ICMP echo samples at 100 ms intervals · round 2026-08-15T04:03:13Z · avg 44.2 ± 0.14 ms (SE)
Sample distribution: box = interquartile range (43.5–44.8 ms), median 43.9 ms · whiskers = min–max · diamond = round average · each dot is one measured sample.
How to read this chart
The shaded band spans the measured minimum to maximum RTT of all samples collected up to that point, and the thin line traces the running average. The final position therefore matches the round statistics exactly — the band only widens when a new extreme sample arrives.
The dashed line is the round average, and the shaded band at the bottom is the theoretical fiber-optic floor (31.8 ms) for this route.
Full 50-sample dataset
| Seq | Offset (ms) | RTT (ms) |
|---|---|---|
| 1 | 0 | 43.34 |
| 2 | 100 | 45.43 |
| 3 | 200 | 44.87 |
| 4 | 300 | 45.24 |
| 5 | 400 | 45.31 |
| 6 | 500 | 43.58 |
| 7 | 600 | 43.05 |
| 8 | 700 | 43.54 |
| 9 | 800 | 46.07 |
| 10 | 900 | 45.43 |
| 11 | 1000 | 43.74 |
| 12 | 1100 | 43.35 |
| 13 | 1200 | 42.93 |
| 14 | 1300 | 44.15 |
| 15 | 1400 | 44.06 |
| 16 | 1500 | 43.57 |
| 17 | 1600 | 44.56 |
| 18 | 1700 | 44.28 |
| 19 | 1800 | 43.87 |
| 20 | 1900 | 43.15 |
| 21 | 2000 | 43.33 |
| 22 | 2100 | 42.88 |
| 23 | 2200 | 43.68 |
| 24 | 2300 | 43.70 |
| 25 | 2400 | 43.12 |
| 26 | 2500 | 44.09 |
| 27 | 2600 | 43.54 |
| 28 | 2700 | 44.76 |
| 29 | 2800 | 43.53 |
| 30 | 2900 | 43.55 |
| 31 | 3000 | 44.59 |
| 32 | 3100 | 43.56 |
| 33 | 3200 | 43.04 |
| 34 | 3300 | 46.44 |
| 35 | 3400 | 44.15 |
| 36 | 3500 | 45.89 |
| 37 | 3600 | 45.08 |
| 38 | 3700 | 43.75 |
| 39 | 3800 | 43.28 |
| 40 | 3900 | 46.35 |
| 41 | 4000 | 44.25 |
| 42 | 4100 | 45.37 |
| 43 | 4200 | 43.65 |
| 44 | 4300 | 46.30 |
| 45 | 4400 | 44.01 |
| 46 | 4500 | 45.09 |
| 47 | 4600 | 43.51 |
| 48 | 4700 | 43.98 |
| 49 | 4800 | 43.53 |
| 50 | 4900 | 44.48 |
Download This Route's Data
This route's measurement round is published as open data (CC BY 4.0) in CSV, JSON, and YAML. See About This Measurement for citation guidance.
Download this dataset
Per-route ICMP ping series, released under CC BY 4.0. Uncompressed plain text — no decompression step needed.
Theoretical Fiber Latency
The public physical reference uses the GeoNames city centres for Taipei (25.05306, 121.52639) and Singapore (1.28967, 103.85007). It does not disclose either facility address.
| Physical Reference | Value |
|---|---|
| WGS-84 geodesic distance | 3,243.9 km |
| Vacuum RTT floor | 21.64 ms |
| Standard fiber RTT floor () | 31.77 ms |
| Low-latency fiber material floor | 31.64 ms |
| Engineering floor (5% path allowance) | 33.36 ms |
| Research 1.33× mapped-fiber reference | 42.25 ms |
| Estimated unamplified path loss | 681.2 dB |
| Transparent optical spans / inline amplifiers | 43 / 42 |
| Published RTT inflation over fiber floor | 1.39× |
Attenuation is used to estimate the number of 80 km optical spans; it does not directly slow light. See the full theoretical fiber latency, GeoNames, attenuation, and amplifier methodology.
Stability & Trend
The current measurement round (2026-08-15T04:03:13Z) collected 50 ICMP echo samples on this route. Distribution statistics from that round:
| Round Statistic | Value |
|---|---|
| Minimum RTT | 42.88 ms |
| Average RTT | 44.2 ms |
| Maximum RTT | 46.44 ms |
| Standard deviation | 0.96 ms |
| Stdev / average | 2.2% |
RTT trend
Estimated route stability across the selected time window.
- Average
- 44.2 ms
- Minimum
- 43.7 ms
- Maximum
- 44.6 ms
- Average loss
- 0.03%
Route Context
- Departure PoP: Taipei (TPE)
- Destination PoP: Singapore (SIN)
- Region overview: Asia Pacific → Asia Pacific
- Full global matrix: Backbone Latency Matrix
- Physical methodology: Theoretical Fiber Latency
Related City-Pair Routes
Reverse direction
- Singapore to Taipei latency and RTT — 44.3 ms
Fastest routes departing Taipei (TPE)
- Taipei to Hong Kong latency and RTT — 15.4 ms
- Taipei to Tokyo latency and RTT — 31.6 ms
- Taipei to Seattle latency and RTT — 115.7 ms
- Taipei to Moscow latency and RTT — 131.7 ms
- Taipei to Sydney latency and RTT — 131.8 ms
Fastest routes arriving at Singapore (SIN)
- Hong Kong to Singapore latency and RTT — 31.2 ms
- Tokyo to Singapore latency and RTT — 69.6 ms
- Melbourne to Singapore latency and RTT — 88.3 ms
- Sydney to Singapore latency and RTT — 94.7 ms
- Marseille to Singapore latency and RTT — 138.5 ms
Same corridor (Asia Pacific → Asia Pacific)
- Melbourne to Sydney latency and RTT — 9.8 ms
- Sydney to Melbourne latency and RTT — 9.8 ms
- Hong Kong to Taipei latency and RTT — 15.2 ms
About This Measurement
Published RTT reflects best-case backbone path behavior measured with ICMP echo probes between PoPs. End-user latency also depends on local access networks, congestion, routing policy, and traffic engineering. None of these values is an SLA.
The measurement round behind this page is published as open data under CC BY 4.0 in the Hats Network latency dataset. Per-pair files are available at /opendata/latency/latest/pairs/tpe-sin.pings.{csv,json,yaml}. When citing, include the route, the measurement round timestamp, and the dataset version — for example: "Hats Network latency dataset, Taipei → Singapore round 2026-08-15T04:03:13Z, CC BY 4.0".
Data auto-generated on August 15, 2026. Explore the full interactive latency matrix or browse more city-pair routes.