Hats Network | LogoHats Network
NetworkLatencyPairs

São Paulo to Sydney Latency, Ping & RTT | AS203314

São Paulo to Sydney ping and RTT: 264.1 ms, 7.99 ms jitter, 131 ms fiber floor, and 49.6% efficiency across AS203314. Updated 2026-08-09.

🇧🇷 This page compares the published ping and round-trip time (RTT) from São Paulo (GRU) to 🇦🇺 Sydney (SYD) with vacuum and optical-fiber physical limits.

As of August 9, 2026, the São Paulo → Sydney route on Hats Network averages 264.1 ms RTT across a 50-sample daily ICMP echo measurement round, 2.02× the theoretical fiber-floor limit of 131 ms.

Among the 19 measured routes departing São Paulo, this route ranks 15th fastest by average RTT.

With a stdev-to-average ratio of 4.1%, this route fluctuates more than the network median of 3.4%, so short congestion windows can surface as transient RTT spikes. Across the round, per-probe RTT ranged from 252.95 ms to 310.33 ms with a standard deviation of 10.94 ms.

Latency Summary

MetricValue
RTT264.1 ms
Jitter7.99 ms
Packet Loss0%
Standard Fiber Floor131 ms
Fiber Efficiency49.6%
Latency TierHigh
Source RegionSouth America
Destination RegionAsia Pacific

Ping Measurement Series

The chart below renders the 50-sample ICMP echo measurement round for this route; an accessible table of every sample is included with the chart.

Ping series: GRUSYD

50 ICMP echo samples at 100 ms intervals · round 2026-08-09 · avg 264.1 ± 1.55 ms (SE)

Sample distribution: box = interquartile range (256.4267.2 ms), median 261.1 ms · whiskers = min–max · diamond = round average · each dot is one measured sample.

How to read this chart

The shaded band spans the measured minimum to maximum RTT of all samples collected up to that point, and the thin line traces the running average. The final position therefore matches the round statistics exactly — the band only widens when a new extreme sample arrives.

The dashed line is the round average, and the shaded band at the bottom is the theoretical fiber-optic floor (131.0 ms) for this route.

Full 50-sample dataset
SeqOffset (ms)RTT (ms)
10253.05
2100257.41
3200254.29
4300254.11
5400252.95
6500255.40
7600285.93
8700265.38
9800310.33
10900275.28
111000264.85
121100258.24
131200271.05
141300261.36
151400256.41
161500267.48
171600263.37
181700270.19
191800277.55
201900271.03
212000261.81
222100283.94
232200265.62
242300258.16
252400260.41
262500280.12
272600283.93
282700281.02
292800264.18
302900256.37
313000256.24
323100256.10
333200257.55
343300258.43
353400259.68
363500268.95
373600257.92
383700260.25
393800261.96
403900264.11
414000262.51
424100261.22
434200260.88
444300257.20
454400255.69
464500254.65
474600253.77
484700256.51
494800253.90
504900266.26

Download This Route's Data

This route's measurement round is published as open data (CC BY 4.0) in CSV, JSON, and YAML. See About This Measurement for citation guidance.

Download this dataset

Per-route ICMP ping series, released under CC BY 4.0. Uncompressed plain text — no decompression step needed.

Theoretical Fiber Latency

The public physical reference uses the GeoNames city centres for São Paulo (-23.54750, -46.63611) and Sydney (-33.86785, 151.20732). It does not disclose either facility address.

Physical ReferenceValue
WGS-84 geodesic distance13,377 km
Vacuum RTT floor89.24 ms
Standard fiber RTT floor (ng=1.4679n_g=1.4679)131 ms
Low-latency fiber material floor130.47 ms
Engineering floor (5% path allowance)137.57 ms
Research 1.33× mapped-fiber reference174.23 ms
Estimated unamplified path loss2809.2 dB
Transparent optical spans / inline amplifiers176 / 175
Published RTT inflation over fiber floor2.02×

Attenuation is used to estimate the number of 80 km optical spans; it does not directly slow light. See the full theoretical fiber latency, GeoNames, attenuation, and amplifier methodology.

Stability & Trend

The current measurement round (2026-08-09) collected 50 ICMP echo samples on this route. Distribution statistics from that round:

Round StatisticValue
Minimum RTT252.95 ms
Average RTT264.1 ms
Maximum RTT310.33 ms
Standard deviation10.94 ms
Stdev / average4.1%

RTT trend

Estimated route stability across the selected time window.

Average
264.1 ms
Minimum
261.9 ms
Maximum
266.9 ms
Average loss
0.02%

Route Context

Reverse direction

Fastest routes departing São Paulo (GRU)

Fastest routes arriving at Sydney (SYD)

Same corridor (South America → Asia Pacific)

About This Measurement

Published RTT reflects best-case backbone path behavior measured with ICMP echo probes between PoPs. End-user latency also depends on local access networks, congestion, routing policy, and traffic engineering. None of these values is an SLA.

The measurement round behind this page is published as open data under CC BY 4.0 in the Hats Network latency dataset. Per-pair files are available at /opendata/latency/latest/pairs/gru-syd.pings.{csv,json,yaml}. When citing, include the route, the measurement round date, and the dataset version — for example: "Hats Network latency dataset, São Paulo → Sydney round 2026-08-09, CC BY 4.0".


Data auto-generated on August 9, 2026. Explore the full interactive latency matrix or browse more city-pair routes.

On this page