Hats Network | LogoHats Network
NetworkLatencyPairs

Tokyo, Japan → Sydney, Australia RTT

Tokyo, Japan to Sydney, Australia ICMP RTT measurements: 101.9 ms average round-trip time, 0% packet loss, jitter, and route context.

🇯🇵 Tokyo, Japan (TYO) → 🇦🇺 Sydney, Australia (SYD)

Measurement round: 2026-08-16T04:07:28Z.

For measurement round 2026-08-16T04:07:28Z, the ICMP echo RTT from Tokyo, Japan to Sydney averages 101.9 ms, with samples from 97.82 ms to 112.89 ms.

It is the sixth-fastest of the 19 outbound routes measured from Tokyo in this round. The 3.32 ms standard deviation is about 3.3% of the average, closely matching the 3.28% median standard-deviation-to-average ratio for the measured set; jitter is 3.13 ms and packet loss is 0%.

The average is 1.34 times the estimated fiber-floor time of 76.31 ms, leaving the route at roughly 74.9% fiber efficiency over the 7,793 km trans-Pacific path. Zero packet loss and a Good latency tier indicate a stable route despite the larger absolute RTT.

Latency Summary

MetricValue
RTT101.9 ms
Jitter3.13 ms
Packet Loss0%
Standard Fiber Floor76.31 ms
Fiber Efficiency74.9%
Latency TierGood
Source RegionAsia Pacific
Destination RegionAsia Pacific

Ping Measurement Series

The chart below renders the 50-sample ICMP echo measurement round for this route; an accessible table of every sample is included with the chart.

Ping series: TYOSYD

50 ICMP echo samples at 100 ms intervals · round 2026-08-16T04:07:28Z · avg 101.9 ± 0.47 ms (SE)

Sample distribution: box = interquartile range (99.6103.4 ms), median 101.0 ms · whiskers = min–max · diamond = round average · each dot is one measured sample.

How to read this chart

The shaded band spans the measured minimum to maximum RTT of all samples collected up to that point, and the thin line traces the running average. The final position therefore matches the round statistics exactly — the band only widens when a new extreme sample arrives.

The dashed line is the round average, and the shaded band at the bottom is the theoretical fiber-optic floor (76.3 ms) for this route.

Full 50-sample dataset
SeqOffset (ms)RTT (ms)
10103.56
210099.89
320098.62
4300101.20
5400100.69
6500105.35
7600100.96
8700103.33
980099.59
10900103.09
11100099.96
121100101.68
13120099.20
14130099.69
151400102.56
161500103.85
171600103.47
181700100.90
19180099.36
201900100.24
21200098.64
22210098.55
23220098.71
242300100.43
252400112.89
262500104.32
272600100.56
282700101.97
292800100.57
30290099.13
313000102.48
323100104.02
333200111.33
343300103.30
353400100.99
363500108.22
373600101.44
383700102.17
39380099.25
40390099.02
41400098.14
42410097.82
434200103.36
444300111.93
454400103.88
464500101.04
47460099.15
484700103.71
494800100.51
504900100.28

Download This Route's Data

This route's measurement round is published as open data (CC BY 4.0) in CSV, JSON, and YAML. See About This Measurement for citation guidance.

Download this dataset

Per-route ICMP ping series, released under CC BY 4.0. Uncompressed plain text — no decompression step needed.

Theoretical Fiber Latency

The public physical reference uses the GeoNames city centres for Tokyo (35.68950, 139.69171) and Sydney (-33.86785, 151.20732). It does not disclose either facility address.

Physical ReferenceValue
WGS-84 geodesic distance7,792.8 km
Vacuum RTT floor51.99 ms
Standard fiber RTT floor (ng=1.4679n_g=1.4679)76.31 ms
Low-latency fiber material floor76.01 ms
Engineering floor (5% path allowance)80.14 ms
Research 1.33× mapped-fiber reference101.5 ms
Estimated unamplified path loss1636.5 dB
Transparent optical spans / inline amplifiers103 / 102
Published RTT inflation over fiber floor1.34×

Attenuation is used to estimate the number of 80 km optical spans; it does not directly slow light. See the full theoretical fiber latency, GeoNames, attenuation, and amplifier methodology.

Stability & Trend

The current measurement round (2026-08-16T04:07:28Z) collected 50 ICMP echo samples on this route. Distribution statistics from that round:

Round StatisticValue
Minimum RTT97.82 ms
Average RTT101.9 ms
Maximum RTT112.89 ms
Standard deviation3.32 ms
Stdev / average3.3%

RTT trend

Estimated route stability across the selected time window.

Average
102.1 ms
Minimum
101.2 ms
Maximum
102.8 ms
Average loss
0.03%

Route Context

Reverse direction

Fastest routes departing Tokyo (TYO)

Fastest routes arriving at Sydney (SYD)

Same corridor (Asia Pacific → Asia Pacific)

About This Measurement

Published RTT reflects best-case backbone path behavior measured with ICMP echo probes between PoPs. End-user latency also depends on local access networks, congestion, routing policy, and traffic engineering. None of these values is an SLA.

The measurement round behind this page is published as open data under CC BY 4.0 in the Hats Network latency dataset. Per-pair files are available at /opendata/latency/latest/pairs/tyo-syd.pings.{csv,json,yaml}. When citing, include the route, the measurement round timestamp, and the dataset version — for example: "Hats Network latency dataset, Tokyo → Sydney round 2026-08-16T04:07:28Z, CC BY 4.0".


Data auto-generated on August 16, 2026. Explore the full interactive latency matrix or browse more city-pair routes.

On this page