Hats Network | LogoHats Network
NetworkLatencyPairs

Singapore → Amsterdam, Netherlands RTT

Singapore, Singapore to Amsterdam, Netherlands: ICMP round-trip time data with average 155.8 ms, min/max, jitter, packet loss, and fiber efficiency.

🇸🇬 Singapore (SIN) → 🇳🇱 Amsterdam, Netherlands (AMS)

Measurement round: 2026-08-16T04:07:28Z.

In the 2026-08-16T04:07:28Z ICMP echo round, the Singapore-to-Amsterdam path averaged 155.8 ms with a minimum of 147.48 ms and a maximum of 172.04 ms; none of the 50 samples were lost.

The measured RTT is 1.51 times the 102.86 ms fiber-floor estimate for the 10,503.4 km great-circle distance, so the route converts about 66% of that theoretical minimum into actual progress. This path ranks 12th among the 19 routes measured from Singapore, and its 6.41 ms standard deviation is about 4.1% of the average, above the 3.28% median spread across that set.

Despite the slightly higher variability, the 6.07 ms jitter and zero packet loss point to a stable long-haul route; the largest measured delay was only about 16 ms above the average, so RTT stayed well contained across all 50 samples.

Latency Summary

MetricValue
RTT155.8 ms
Jitter6.07 ms
Packet Loss0%
Standard Fiber Floor102.86 ms
Fiber Efficiency66%
Latency TierFair
Source RegionAsia Pacific
Destination RegionEurope

Ping Measurement Series

The chart below renders the 50-sample ICMP echo measurement round for this route; an accessible table of every sample is included with the chart.

Ping series: SINAMS

50 ICMP echo samples at 100 ms intervals · round 2026-08-16T04:07:28Z · avg 155.8 ± 0.91 ms (SE)

Sample distribution: box = interquartile range (150.8159.2 ms), median 154.2 ms · whiskers = min–max · diamond = round average · each dot is one measured sample.

How to read this chart

The shaded band spans the measured minimum to maximum RTT of all samples collected up to that point, and the thin line traces the running average. The final position therefore matches the round statistics exactly — the band only widens when a new extreme sample arrives.

The dashed line is the round average, and the shaded band at the bottom is the theoretical fiber-optic floor (102.9 ms) for this route.

Full 50-sample dataset
SeqOffset (ms)RTT (ms)
10166.89
2100156.11
3200155.94
4300155.88
5400150.11
6500150.73
7600148.72
8700147.48
9800152.44
10900149.32
111000148.37
121100147.92
131200152.34
141300153.86
151400155.73
161500160.31
171600155.41
181700152.41
191800150.44
201900154.57
212000149.94
222100149.61
232200158.40
242300152.81
252400162.89
262500158.54
272600165.34
282700153.14
292800149.04
302900156.64
313000153.03
323100156.93
333200151.26
343300169.37
353400155.42
363500163.73
373600161.22
383700172.01
393800159.08
403900160.19
414000151.27
424100162.36
434200152.73
444300172.04
454400159.30
464500150.94
474600149.08
484700151.81
494800149.25
504900167.65

Download This Route's Data

This route's measurement round is published as open data (CC BY 4.0) in CSV, JSON, and YAML. See About This Measurement for citation guidance.

Download this dataset

Per-route ICMP ping series, released under CC BY 4.0. Uncompressed plain text — no decompression step needed.

Theoretical Fiber Latency

The public physical reference uses the GeoNames city centres for Singapore (1.28967, 103.85007) and Amsterdam (52.37403, 4.88969). It does not disclose either facility address.

Physical ReferenceValue
WGS-84 geodesic distance10,503.4 km
Vacuum RTT floor70.07 ms
Standard fiber RTT floor (ng=1.4679n_g=1.4679)102.86 ms
Low-latency fiber material floor102.44 ms
Engineering floor (5% path allowance)108.01 ms
Research 1.33× mapped-fiber reference136.8 ms
Estimated unamplified path loss2205.7 dB
Transparent optical spans / inline amplifiers138 / 137
Published RTT inflation over fiber floor1.51×

Attenuation is used to estimate the number of 80 km optical spans; it does not directly slow light. See the full theoretical fiber latency, GeoNames, attenuation, and amplifier methodology.

Stability & Trend

The current measurement round (2026-08-16T04:07:28Z) collected 50 ICMP echo samples on this route. Distribution statistics from that round:

Round StatisticValue
Minimum RTT147.48 ms
Average RTT155.8 ms
Maximum RTT172.04 ms
Standard deviation6.41 ms
Stdev / average4.1%

RTT trend

Estimated route stability across the selected time window.

Average
155.7 ms
Minimum
154.1 ms
Maximum
156.8 ms
Average loss
0.02%

Route Context

Reverse direction

Fastest routes departing Singapore (SIN)

Fastest routes arriving at Amsterdam (AMS)

Same corridor (Asia Pacific → Europe)

About This Measurement

Published RTT reflects best-case backbone path behavior measured with ICMP echo probes between PoPs. End-user latency also depends on local access networks, congestion, routing policy, and traffic engineering. None of these values is an SLA.

The measurement round behind this page is published as open data under CC BY 4.0 in the Hats Network latency dataset. Per-pair files are available at /opendata/latency/latest/pairs/sin-ams.pings.{csv,json,yaml}. When citing, include the route, the measurement round timestamp, and the dataset version — for example: "Hats Network latency dataset, Singapore → Amsterdam round 2026-08-16T04:07:28Z, CC BY 4.0".


Data auto-generated on August 16, 2026. Explore the full interactive latency matrix or browse more city-pair routes.

On this page