# Sydney, Australia → São Paulo, Brazil RTT

🇦🇺 **Sydney, Australia (SYD)** → 🇧🇷 **São Paulo, Brazil (GRU)**

Measurement round: `2026-08-16T04:07:28Z`.

The 2026-08-16T04:07:28Z round from Sydney, Australia, to São Paulo, Brazil measured an average ICMP echo RTT of 296.7 ms over 50 samples, with 0% packet loss and a high latency tier.

For the 13,377 km great-circle distance, the average is 2.26 times the theoretical fiber floor, or 44.2% fiber efficiency. It placed 18th out of 19 outbound paths measured from the Sydney gateway, near the slower end of the group.

Standard deviation was 13.03 ms and jitter 10.12 ms, around 4.4% of the average, above the network's median variability of 3.3%. The 59.01 ms gap between fastest and slowest samples, combined with zero loss, shows a high-latency route whose round trips varied more than the network norm during this test.

## Latency Summary

| Metric               | Value                                                        |
| -------------------- | ------------------------------------------------------------ |
| RTT                  | **296.7 ms**                                                 |
| Jitter               | **10.12 ms**                                                 |
| Packet Loss          | **0%**                                                       |
| Standard Fiber Floor | **131 ms**                                                   |
| Fiber Efficiency     | **44.2%**                                                    |
| Latency Tier         | High                                                         |
| Source Region        | [Asia Pacific](/docs/network/latency/regions/asia-pacific)   |
| Destination Region   | [South America](/docs/network/latency/regions/south-america) |

## Ping Measurement Series

The chart below renders the 50-sample ICMP echo measurement round for this route; an accessible table of every sample is included with the chart.

## Download This Route's Data

This route's measurement round is published as open data (CC BY 4.0) in CSV, JSON, and YAML. See [About This Measurement](#about-this-measurement) for citation guidance.

## Theoretical Fiber Latency

The public physical reference uses the GeoNames city centres for [Sydney](https://www.geonames.org/2147714) (-33.86785, 151.20732) and [São Paulo](https://www.geonames.org/3448439) (-23.54750, -46.63611). It does not disclose either facility address.

| Physical Reference                            | Value         |
| --------------------------------------------- | ------------- |
| WGS-84 geodesic distance                      | **13,377 km** |
| Vacuum RTT floor                              | **89.24 ms**  |
| Standard fiber RTT floor ($n_g=1.4679$)       | **131 ms**    |
| Low-latency fiber material floor              | **130.47 ms** |
| Engineering floor (5% path allowance)         | **137.57 ms** |
| Research 1.33× mapped-fiber reference         | **174.23 ms** |
| Estimated unamplified path loss               | **2809.2 dB** |
| Transparent optical spans / inline amplifiers | **176 / 175** |
| Published RTT inflation over fiber floor      | **2.26×**     |

Attenuation is used to estimate the number of 80 km optical spans; it does not directly slow light. See the full [theoretical fiber latency, GeoNames, attenuation, and amplifier methodology](/docs/network/latency/theoretical-fiber-latency).

## Stability & Trend

The current measurement round (2026-08-16T04:07:28Z) collected 50 ICMP echo samples on this route. Distribution statistics from that round:

| Round Statistic    | Value         |
| ------------------ | ------------- |
| Minimum RTT        | **278.26 ms** |
| Average RTT        | **296.7 ms**  |
| Maximum RTT        | **337.27 ms** |
| Standard deviation | **13.03 ms**  |
| Stdev / average    | **4.4%**      |

## Route Context

* Departure PoP: [Sydney (SYD)](/docs/network/latency/syd-sydney)
* Destination PoP: [São Paulo (GRU)](/docs/network/latency/gru-sao-paulo)
* Region overview: [Asia Pacific](/docs/network/latency/regions/asia-pacific) → [South America](/docs/network/latency/regions/south-america)
* Corridor overview: [Asia Pacific to South America](/docs/network/latency/regions/asia-pacific-to-south-america)
* Full global matrix: [Backbone Latency Matrix](/docs/network/latency)
* Physical methodology: [Theoretical Fiber Latency](/docs/network/latency/theoretical-fiber-latency)

## Related City-Pair Routes

**Reverse direction**

* [São Paulo to Sydney latency and RTT](/docs/network/latency/pairs/gru-syd-rtt) — 265.5 ms

**Fastest routes departing Sydney (SYD)**

* [Sydney to Melbourne latency and RTT](/docs/network/latency/pairs/syd-mel-rtt) — 9.8 ms
* [Sydney to Singapore latency and RTT](/docs/network/latency/pairs/syd-sin-rtt) — 94.5 ms
* [Sydney to Tokyo latency and RTT](/docs/network/latency/pairs/syd-tyo-rtt) — 101.3 ms
* [Sydney to Taipei latency and RTT](/docs/network/latency/pairs/syd-tpe-rtt) — 131.7 ms
* [Sydney to Hong Kong latency and RTT](/docs/network/latency/pairs/syd-hkg-rtt) — 135.7 ms

**Fastest routes arriving at São Paulo (GRU)**

* [Ashburn to São Paulo latency and RTT](/docs/network/latency/pairs/iad-gru-rtt) — 101.4 ms
* [New York to São Paulo latency and RTT](/docs/network/latency/pairs/nyc-gru-rtt) — 106.9 ms
* [Miami to São Paulo latency and RTT](/docs/network/latency/pairs/mia-gru-rtt) — 128.7 ms
* [Los Angeles to São Paulo latency and RTT](/docs/network/latency/pairs/lax-gru-rtt) — 131.3 ms
* [Seattle to São Paulo latency and RTT](/docs/network/latency/pairs/sea-gru-rtt) — 155.7 ms

**Same corridor (Asia Pacific → South America)**

* [Tokyo to São Paulo latency and RTT](/docs/network/latency/pairs/tyo-gru-rtt) — 230.5 ms
* [Taipei to São Paulo latency and RTT](/docs/network/latency/pairs/tpe-gru-rtt) — 273 ms
* [Hong Kong to São Paulo latency and RTT](/docs/network/latency/pairs/hkg-gru-rtt) — 287.6 ms

## About This Measurement

Published RTT reflects best-case backbone path behavior measured with ICMP echo probes between PoPs. End-user latency also depends on local access networks, congestion, routing policy, and traffic engineering. None of these values is an SLA.

The measurement round behind this page is published as open data under **CC BY 4.0** in the [Hats Network latency dataset](/opendata/latency/). Per-pair files are available at `/opendata/latency/latest/pairs/syd-gru.pings.{csv,json,yaml}`. When citing, include the route, the measurement round timestamp, and the dataset version — for example: "Hats Network latency dataset, Sydney → São Paulo round 2026-08-16T04:07:28Z, CC BY 4.0".

***

*Data auto-generated on August 16, 2026. Explore the [full interactive latency matrix](/docs/network/latency) or browse more [city-pair routes](/docs/network/latency/pairs).*

---

## License and attribution

- **Canonical source:** [View the human-readable HTML page](https://hatsnet.io/docs/network/latency/pairs/syd-gru-rtt).
- **Original documentation:** © Hats Network Inc., licensed under [CC BY-SA 4.0](https://creativecommons.org/licenses/by-sa/4.0/).
- **Public latency data:** © Hats Network Inc., licensed under [CC BY 4.0](https://creativecommons.org/licenses/by/4.0/).
- **Full terms:** [Content and Data License](https://hatsnet.io/docs/legal/content-and-data-license) — includes attribution requirements, third-party material, trademarks, source code and other exclusions.