# Paris, France → Seattle, USA RTT

🇫🇷 **Paris, France (PAR)** → 🇺🇸 **Seattle, USA (SEA)**

Measurement round: `2026-08-16T04:07:28Z`.

In the 2026-08-16T04:07:28Z round, ICMP echo RTT from Paris, France to Seattle, USA averaged 128 ms over 50 samples, with a minimum of 123.76 ms and a maximum of 137.5 ms. Packet loss was 0 percent and jitter was 2.63 ms.

This route ranked 10th among 19 outbound routes measured from Paris, placing it near the middle of that set. Its standard deviation of 3.51 ms equals about 2.7 percent of the average RTT, below the 3.28 percent median relative variability seen across the measured routes.

With a great-circle distance of 8,065.2 km, the observed 128 ms average is roughly 1.62 times the fiber-floor estimate, for an implied fiber efficiency of 61.7%. The extra headroom above the floor is consistent with a longer intercontinental crossing, while the zero packet loss keeps the route clean over that distance.

## Latency Summary

| Metric               | Value                                                        |
| -------------------- | ------------------------------------------------------------ |
| RTT                  | **128 ms**                                                   |
| Jitter               | **2.63 ms**                                                  |
| Packet Loss          | **0%**                                                       |
| Standard Fiber Floor | **78.98 ms**                                                 |
| Fiber Efficiency     | **61.7%**                                                    |
| Latency Tier         | Good                                                         |
| Source Region        | [Europe](/docs/network/latency/regions/europe)               |
| Destination Region   | [North America](/docs/network/latency/regions/north-america) |

## Ping Measurement Series

The chart below renders the 50-sample ICMP echo measurement round for this route; an accessible table of every sample is included with the chart.

## Download This Route's Data

This route's measurement round is published as open data (CC BY 4.0) in CSV, JSON, and YAML. See [About This Measurement](#about-this-measurement) for citation guidance.

## Theoretical Fiber Latency

The public physical reference uses the GeoNames city centres for [Paris](https://www.geonames.org/2988507) (48.85341, 2.34880) and [Seattle](https://www.geonames.org/5809844) (47.60621, -122.33207). It does not disclose either facility address.

| Physical Reference                            | Value          |
| --------------------------------------------- | -------------- |
| WGS-84 geodesic distance                      | **8,065.2 km** |
| Vacuum RTT floor                              | **53.8 ms**    |
| Standard fiber RTT floor ($n_g=1.4679$)       | **78.98 ms**   |
| Low-latency fiber material floor              | **78.66 ms**   |
| Engineering floor (5% path allowance)         | **82.94 ms**   |
| Research 1.33× mapped-fiber reference         | **105.04 ms**  |
| Estimated unamplified path loss               | **1693.7 dB**  |
| Transparent optical spans / inline amplifiers | **106 / 105**  |
| Published RTT inflation over fiber floor      | **1.62×**      |

Attenuation is used to estimate the number of 80 km optical spans; it does not directly slow light. See the full [theoretical fiber latency, GeoNames, attenuation, and amplifier methodology](/docs/network/latency/theoretical-fiber-latency).

## Stability & Trend

The current measurement round (2026-08-16T04:07:28Z) collected 50 ICMP echo samples on this route. Distribution statistics from that round:

| Round Statistic    | Value         |
| ------------------ | ------------- |
| Minimum RTT        | **123.76 ms** |
| Average RTT        | **128 ms**    |
| Maximum RTT        | **137.5 ms**  |
| Standard deviation | **3.51 ms**   |
| Stdev / average    | **2.7%**      |

## Route Context

* Departure PoP: [Paris (PAR)](/docs/network/latency/par-paris)
* Destination PoP: [Seattle (SEA)](/docs/network/latency/sea-seattle)
* Region overview: [Europe](/docs/network/latency/regions/europe) → [North America](/docs/network/latency/regions/north-america)
* Corridor overview: [Europe to North America](/docs/network/latency/regions/europe-to-north-america)
* Full global matrix: [Backbone Latency Matrix](/docs/network/latency)
* Physical methodology: [Theoretical Fiber Latency](/docs/network/latency/theoretical-fiber-latency)

## Related City-Pair Routes

**Reverse direction**

* [Seattle to Paris latency and RTT](/docs/network/latency/pairs/sea-par-rtt) — 129.2 ms

**Fastest routes departing Paris (PAR)**

* [Paris to London latency and RTT](/docs/network/latency/pairs/par-lon-rtt) — 6.4 ms
* [Paris to Amsterdam latency and RTT](/docs/network/latency/pairs/par-ams-rtt) — 7 ms
* [Paris to Frankfurt latency and RTT](/docs/network/latency/pairs/par-fra-rtt) — 7.6 ms
* [Paris to Marseille latency and RTT](/docs/network/latency/pairs/par-mrs-rtt) — 8.9 ms
* [Paris to Berlin latency and RTT](/docs/network/latency/pairs/par-ber-rtt) — 15.5 ms

**Fastest routes arriving at Seattle (SEA)**

* [Los Angeles to Seattle latency and RTT](/docs/network/latency/pairs/lax-sea-rtt) — 26.9 ms
* [New York to Seattle latency and RTT](/docs/network/latency/pairs/nyc-sea-rtt) — 58.7 ms
* [Ashburn to Seattle latency and RTT](/docs/network/latency/pairs/iad-sea-rtt) — 62.3 ms
* [Miami to Seattle latency and RTT](/docs/network/latency/pairs/mia-sea-rtt) — 81.9 ms
* [Tokyo to Seattle latency and RTT](/docs/network/latency/pairs/tyo-sea-rtt) — 84.8 ms

**Same corridor (Europe → North America)**

* [London to New York latency and RTT](/docs/network/latency/pairs/lon-nyc-rtt) — 63.8 ms
* [Amsterdam to New York latency and RTT](/docs/network/latency/pairs/ams-nyc-rtt) — 68.6 ms
* [Paris to New York latency and RTT](/docs/network/latency/pairs/par-nyc-rtt) — 68.9 ms

## About This Measurement

Published RTT reflects best-case backbone path behavior measured with ICMP echo probes between PoPs. End-user latency also depends on local access networks, congestion, routing policy, and traffic engineering. None of these values is an SLA.

The measurement round behind this page is published as open data under **CC BY 4.0** in the [Hats Network latency dataset](/opendata/latency/). Per-pair files are available at `/opendata/latency/latest/pairs/par-sea.pings.{csv,json,yaml}`. When citing, include the route, the measurement round timestamp, and the dataset version — for example: "Hats Network latency dataset, Paris → Seattle round 2026-08-16T04:07:28Z, CC BY 4.0".

***

*Data auto-generated on August 16, 2026. Explore the [full interactive latency matrix](/docs/network/latency) or browse more [city-pair routes](/docs/network/latency/pairs).*

---

## License and attribution

- **Canonical source:** [View the human-readable HTML page](https://hatsnet.io/docs/network/latency/pairs/par-sea-rtt).
- **Original documentation:** © Hats Network Inc., licensed under [CC BY-SA 4.0](https://creativecommons.org/licenses/by-sa/4.0/).
- **Public latency data:** © Hats Network Inc., licensed under [CC BY 4.0](https://creativecommons.org/licenses/by/4.0/).
- **Full terms:** [Content and Data License](https://hatsnet.io/docs/legal/content-and-data-license) — includes attribution requirements, third-party material, trademarks, source code and other exclusions.