# Ashburn, USA → Singapore RTT

🇺🇸 **Ashburn, USA (IAD)** → 🇸🇬 **Singapore (SIN)**

Measurement round: `2026-08-16T04:07:28Z`.

The 2026-08-16T04:07:28Z ICMP echo RTT measurement from Ashburn, USA, to Singapore, Singapore, produced an average of 211.5 ms across 50 samples, with a minimum of 203.83 ms and a maximum of 243.56 ms. All packets were returned, so reported packet loss is 0%; the standard deviation of 6.36 ms and jitter of 5.45 ms place the route in the Fair latency tier.

At a geodesic distance of 15,535.9 km, the theoretical fiber-floor RTT is 152.14 ms. The measured average therefore sits at 1.39 times that floor, corresponding to roughly 71.9% fiber efficiency. That gap leaves room for possible path improvements, though this single series does not by itself explain where the extra delay occurs.

Compared with the 19 outbound routes measured from this network, this path ranked 18th by average RTT. Its standard deviation is about 3.0% of the average, slightly below the 3.28% median variability observed across the outbound route set. The loss-free result is a useful stability signal, but ICMP RTT should not be treated as a predictor of end-user application performance.

## Latency Summary

| Metric               | Value                                                        |
| -------------------- | ------------------------------------------------------------ |
| RTT                  | **211.5 ms**                                                 |
| Jitter               | **5.45 ms**                                                  |
| Packet Loss          | **0%**                                                       |
| Standard Fiber Floor | **152.14 ms**                                                |
| Fiber Efficiency     | **71.9%**                                                    |
| Latency Tier         | Fair                                                         |
| Source Region        | [North America](/docs/network/latency/regions/north-america) |
| Destination Region   | [Asia Pacific](/docs/network/latency/regions/asia-pacific)   |

## Ping Measurement Series

The chart below renders the 50-sample ICMP echo measurement round for this route; an accessible table of every sample is included with the chart.

## Download This Route's Data

This route's measurement round is published as open data (CC BY 4.0) in CSV, JSON, and YAML. See [About This Measurement](#about-this-measurement) for citation guidance.

## Theoretical Fiber Latency

The public physical reference uses the GeoNames city centres for [Ashburn](https://www.geonames.org/4744870) (39.04372, -77.48749) and [Singapore](https://www.geonames.org/1880252) (1.28967, 103.85007). It does not disclose either facility address.

| Physical Reference                            | Value           |
| --------------------------------------------- | --------------- |
| WGS-84 geodesic distance                      | **15,535.9 km** |
| Vacuum RTT floor                              | **103.64 ms**   |
| Standard fiber RTT floor ($n_g=1.4679$)       | **152.14 ms**   |
| Low-latency fiber material floor              | **151.53 ms**   |
| Engineering floor (5% path allowance)         | **159.77 ms**   |
| Research 1.33× mapped-fiber reference         | **202.35 ms**   |
| Estimated unamplified path loss               | **3262.5 dB**   |
| Transparent optical spans / inline amplifiers | **204 / 203**   |
| Published RTT inflation over fiber floor      | **1.39×**       |

Attenuation is used to estimate the number of 80 km optical spans; it does not directly slow light. See the full [theoretical fiber latency, GeoNames, attenuation, and amplifier methodology](/docs/network/latency/theoretical-fiber-latency).

## Stability & Trend

The current measurement round (2026-08-16T04:07:28Z) collected 50 ICMP echo samples on this route. Distribution statistics from that round:

| Round Statistic    | Value         |
| ------------------ | ------------- |
| Minimum RTT        | **203.83 ms** |
| Average RTT        | **211.5 ms**  |
| Maximum RTT        | **243.56 ms** |
| Standard deviation | **6.36 ms**   |
| Stdev / average    | **3.0%**      |

## Route Context

* Departure PoP: [Ashburn (IAD)](/docs/network/latency/iad-ashburn)
* Destination PoP: [Singapore (SIN)](/docs/network/latency/sin-singapore)
* Region overview: [North America](/docs/network/latency/regions/north-america) → [Asia Pacific](/docs/network/latency/regions/asia-pacific)
* Corridor overview: [North America to Asia Pacific](/docs/network/latency/regions/north-america-to-asia-pacific)
* Full global matrix: [Backbone Latency Matrix](/docs/network/latency)
* Physical methodology: [Theoretical Fiber Latency](/docs/network/latency/theoretical-fiber-latency)

## Related City-Pair Routes

**Reverse direction**

* [Singapore to Ashburn latency and RTT](/docs/network/latency/pairs/sin-iad-rtt) — 210 ms

**Fastest routes departing Ashburn (IAD)**

* [Ashburn to New York latency and RTT](/docs/network/latency/pairs/iad-nyc-rtt) — 6 ms
* [Ashburn to Miami latency and RTT](/docs/network/latency/pairs/iad-mia-rtt) — 27.4 ms
* [Ashburn to Los Angeles latency and RTT](/docs/network/latency/pairs/iad-lax-rtt) — 60.7 ms
* [Ashburn to Seattle latency and RTT](/docs/network/latency/pairs/iad-sea-rtt) — 62.3 ms
* [Ashburn to London latency and RTT](/docs/network/latency/pairs/iad-lon-rtt) — 70.3 ms

**Fastest routes arriving at Singapore (SIN)**

* [Hong Kong to Singapore latency and RTT](/docs/network/latency/pairs/hkg-sin-rtt) — 31.5 ms
* [Taipei to Singapore latency and RTT](/docs/network/latency/pairs/tpe-sin-rtt) — 44.3 ms
* [Tokyo to Singapore latency and RTT](/docs/network/latency/pairs/tyo-sin-rtt) — 69.4 ms
* [Melbourne to Singapore latency and RTT](/docs/network/latency/pairs/mel-sin-rtt) — 88.4 ms
* [Sydney to Singapore latency and RTT](/docs/network/latency/pairs/syd-sin-rtt) — 94.5 ms

**Same corridor (North America → Asia Pacific)**

* [Seattle to Tokyo latency and RTT](/docs/network/latency/pairs/sea-tyo-rtt) — 85 ms
* [Los Angeles to Tokyo latency and RTT](/docs/network/latency/pairs/lax-tyo-rtt) — 101.2 ms
* [Seattle to Taipei latency and RTT](/docs/network/latency/pairs/sea-tpe-rtt) — 114.7 ms

## About This Measurement

Published RTT reflects best-case backbone path behavior measured with ICMP echo probes between PoPs. End-user latency also depends on local access networks, congestion, routing policy, and traffic engineering. None of these values is an SLA.

The measurement round behind this page is published as open data under **CC BY 4.0** in the [Hats Network latency dataset](/opendata/latency/). Per-pair files are available at `/opendata/latency/latest/pairs/iad-sin.pings.{csv,json,yaml}`. When citing, include the route, the measurement round timestamp, and the dataset version — for example: "Hats Network latency dataset, Ashburn → Singapore round 2026-08-16T04:07:28Z, CC BY 4.0".

***

*Data auto-generated on August 16, 2026. Explore the [full interactive latency matrix](/docs/network/latency) or browse more [city-pair routes](/docs/network/latency/pairs).*

---

## License and attribution

- **Canonical source:** [View the human-readable HTML page](https://hatsnet.io/docs/network/latency/pairs/iad-sin-rtt).
- **Original documentation:** © Hats Network Inc., licensed under [CC BY-SA 4.0](https://creativecommons.org/licenses/by-sa/4.0/).
- **Public latency data:** © Hats Network Inc., licensed under [CC BY 4.0](https://creativecommons.org/licenses/by/4.0/).
- **Full terms:** [Content and Data License](https://hatsnet.io/docs/legal/content-and-data-license) — includes attribution requirements, third-party material, trademarks, source code and other exclusions.