# Amsterdam, Netherlands → Frankfurt, Germany RTT

🇳🇱 **Amsterdam, Netherlands (AMS)** → 🇩🇪 **Frankfurt, Germany (FRA)**

Measurement round: `2026-08-16T04:07:28Z`.

For the 2026-08-16T04:07:28Z round, ICMP echo probes from Amsterdam, Netherlands to Frankfurt, Germany returned an average of 5.9 ms across 50 samples, with a minimum of 5.67 ms and a maximum of 7.15 ms. Packet loss was zero and jitter was 0.17 ms, making the measurement window consistently quiet.

The geodesic span is 365.1 km, with a theoretical vacuum floor of 2.44 ms and a fiber floor of 3.57 ms. The 5.9 ms average is 1.65 times the fiber floor, putting fiber efficiency at 60.6% and leaving roughly 2.3 ms of additional latency to account for in the path overhead.

Within the same round, this route comes second among 19 outbound paths measured from Amsterdam. Its standard deviation of 0.23 ms is about 3.9% of the 5.9 ms average, close to the 3.28% median standard-deviation-to-average ratio for the route set, while jitter stays at just 0.17 ms.

## Latency Summary

| Metric               | Value                                          |
| -------------------- | ---------------------------------------------- |
| RTT                  | **5.9 ms**                                     |
| Jitter               | **0.17 ms**                                    |
| Packet Loss          | **0%**                                         |
| Standard Fiber Floor | **3.57 ms**                                    |
| Fiber Efficiency     | **60.6%**                                      |
| Latency Tier         | Ultra-Low                                      |
| Source Region        | [Europe](/docs/network/latency/regions/europe) |
| Destination Region   | [Europe](/docs/network/latency/regions/europe) |

## Ping Measurement Series

The chart below renders the 50-sample ICMP echo measurement round for this route; an accessible table of every sample is included with the chart.

## Download This Route's Data

This route's measurement round is published as open data (CC BY 4.0) in CSV, JSON, and YAML. See [About This Measurement](#about-this-measurement) for citation guidance.

## Theoretical Fiber Latency

The public physical reference uses the GeoNames city centres for [Amsterdam](https://www.geonames.org/2759794) (52.37403, 4.88969) and [Frankfurt am Main](https://www.geonames.org/2925533) (50.11552, 8.68417). It does not disclose either facility address.

| Physical Reference                            | Value        |
| --------------------------------------------- | ------------ |
| WGS-84 geodesic distance                      | **365.1 km** |
| Vacuum RTT floor                              | **2.44 ms**  |
| Standard fiber RTT floor ($n_g=1.4679$)       | **3.57 ms**  |
| Low-latency fiber material floor              | **3.56 ms**  |
| Engineering floor (5% path allowance)         | **3.75 ms**  |
| Research 1.33× mapped-fiber reference         | **4.75 ms**  |
| Estimated unamplified path loss               | **76.7 dB**  |
| Transparent optical spans / inline amplifiers | **5 / 4**    |
| Published RTT inflation over fiber floor      | **1.65×**    |

Attenuation is used to estimate the number of 80 km optical spans; it does not directly slow light. See the full [theoretical fiber latency, GeoNames, attenuation, and amplifier methodology](/docs/network/latency/theoretical-fiber-latency).

## Stability & Trend

The current measurement round (2026-08-16T04:07:28Z) collected 50 ICMP echo samples on this route. Distribution statistics from that round:

| Round Statistic    | Value       |
| ------------------ | ----------- |
| Minimum RTT        | **5.67 ms** |
| Average RTT        | **5.9 ms**  |
| Maximum RTT        | **7.15 ms** |
| Standard deviation | **0.23 ms** |
| Stdev / average    | **3.9%**    |

## Route Context

* Departure PoP: [Amsterdam (AMS)](/docs/network/latency/ams-amsterdam)
* Destination PoP: [Frankfurt (FRA)](/docs/network/latency/fra-frankfurt)
* Region overview: [Europe](/docs/network/latency/regions/europe) → [Europe](/docs/network/latency/regions/europe)
* Full global matrix: [Backbone Latency Matrix](/docs/network/latency)
* Physical methodology: [Theoretical Fiber Latency](/docs/network/latency/theoretical-fiber-latency)

## Related City-Pair Routes

**Reverse direction**

* [Frankfurt to Amsterdam latency and RTT](/docs/network/latency/pairs/fra-ams-rtt) — 5.9 ms

**Fastest routes departing Amsterdam (AMS)**

* [Amsterdam to London latency and RTT](/docs/network/latency/pairs/ams-lon-rtt) — 5.2 ms
* [Amsterdam to Paris latency and RTT](/docs/network/latency/pairs/ams-par-rtt) — 7 ms
* [Amsterdam to Berlin latency and RTT](/docs/network/latency/pairs/ams-ber-rtt) — 7.2 ms
* [Amsterdam to Marseille latency and RTT](/docs/network/latency/pairs/ams-mrs-rtt) — 19.6 ms
* [Amsterdam to Moscow latency and RTT](/docs/network/latency/pairs/ams-mow-rtt) — 38.1 ms

**Fastest routes arriving at Frankfurt (FRA)**

* [Berlin to Frankfurt latency and RTT](/docs/network/latency/pairs/ber-fra-rtt) — 6.1 ms
* [Paris to Frankfurt latency and RTT](/docs/network/latency/pairs/par-fra-rtt) — 7.6 ms
* [London to Frankfurt latency and RTT](/docs/network/latency/pairs/lon-fra-rtt) — 13.6 ms
* [Marseille to Frankfurt latency and RTT](/docs/network/latency/pairs/mrs-fra-rtt) — 16 ms
* [Moscow to Frankfurt latency and RTT](/docs/network/latency/pairs/mow-fra-rtt) — 35.9 ms

**Same corridor (Europe → Europe)**

* [London to Amsterdam latency and RTT](/docs/network/latency/pairs/lon-ams-rtt) — 5.2 ms
* [Frankfurt to Berlin latency and RTT](/docs/network/latency/pairs/fra-ber-rtt) — 6.1 ms
* [London to Paris latency and RTT](/docs/network/latency/pairs/lon-par-rtt) — 6.4 ms

## About This Measurement

Published RTT reflects best-case backbone path behavior measured with ICMP echo probes between PoPs. End-user latency also depends on local access networks, congestion, routing policy, and traffic engineering. None of these values is an SLA.

The measurement round behind this page is published as open data under **CC BY 4.0** in the [Hats Network latency dataset](/opendata/latency/). Per-pair files are available at `/opendata/latency/latest/pairs/ams-fra.pings.{csv,json,yaml}`. When citing, include the route, the measurement round timestamp, and the dataset version — for example: "Hats Network latency dataset, Amsterdam → Frankfurt round 2026-08-16T04:07:28Z, CC BY 4.0".

***

*Data auto-generated on August 16, 2026. Explore the [full interactive latency matrix](/docs/network/latency) or browse more [city-pair routes](/docs/network/latency/pairs).*

---

## License and attribution

- **Canonical source:** [View the human-readable HTML page](https://hatsnet.io/docs/network/latency/pairs/ams-fra-rtt).
- **Original documentation:** © Hats Network Inc., licensed under [CC BY-SA 4.0](https://creativecommons.org/licenses/by-sa/4.0/).
- **Public latency data:** © Hats Network Inc., licensed under [CC BY 4.0](https://creativecommons.org/licenses/by/4.0/).
- **Full terms:** [Content and Data License](https://hatsnet.io/docs/legal/content-and-data-license) — includes attribution requirements, third-party material, trademarks, source code and other exclusions.